Assembly Instruction

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
NOTE: Do not over
tighten the screws
NOTE: Do not over tighten
the cam screws
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
Made in Vietnam - r05 Page 2 of 5
1 A) Insert 10 cam screws into top panel as shown. Secure,
but do not over tighten, cam screws using a phillips head
screwdriver.
B) Insert 4 wood dowels and 6 cams into bottom panel as
shown. Make sure arrows on each cam point toward nearest
edge with holes.
ABBOTT SIX DRAWER DRESSER
3 A) Insert 2 wood dowels and 4 cams into top crossbar
as shown.
B) Insert 2 wood dowels and 2 cams into bottom crossbar
as shown.
4 Fit dowels of partition into corresponding holes of
bottom panel as shown. Secure partition to bottom
frame with 2 allen screws, using an allen wrench. Do
not over tighten the screws.
bottom frame
2 A) Insert 4 wood dowels and 2 cams into partition as
shown.
B) Insert 2 wood dowels, 5 cam screws and 3 cams into
left and right side panels as shown.
top panel
left and right
side panels
partition
top crossbar
bottom crossbar
A
B
A
B
A
B
bottom panel
partition