Assembly Instruction

ABBOTT NIGHTSTAND
Made in Vietnam - r04 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 Insert 3 cam screws, 2 cams and 2 wood dowels
into left and right side panels as shown. Secure, but
do not over tighten cam screws with a phillips head
screwdriver. Make sure arrows on each cam point
toward nearest edge with holes.
2 A) Insert 4 cams and 4 wood dowels into shelf as
shown.
B) Insert 3 cams and 2 wood dowels into crossbar as
shown.
3 With the assistance of another adult, fit dowels of
shelf and crossbar into corresponding holes of left
and right side panels as shown. With a screwdriver,
turn each cam clockwise until it securely engages
each cam screw.
4 Insert 5 cam screws into top panel as shown.
NOTE: Do not over
tighten the cam screws
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
A
B
left side
panel
right side
panel