Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Abbott Nightstand

COMPONENTS

Made in Vietnam - r04 Page 1 of 4

Thank you for purchasing the Abbott Nightstand.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

ABBOTT NIGHTSTAND

1 - drawer back 1 - drawer front2 - drawer sides

(1 left, 1 right)

2 - side panels

(1 left, 1 right)

1 - shelf 1 - back panel1 - top panel

HARDWARE

TOOLS REQUIRED

Missing hardware? Please call 800.606.6387 for replacements.

10 - wood

dowels

8 - large

screws

11 - cams

14 - small

screws

phillips head screwdriver

(We recommend the use of hand tools instead power tools)

11 - cam

screws

1 - crossbar

1 - drawer bottom

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (4 pages)

PAGE 1
ABBOTT NIGHTSTAND HARDWARE 10 - wood dowels 11 - cam screws 14 - small screws 11 - cams 8 - large screws Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Abbott Nightstand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ABBOTT NIGHTSTAND NOTE: Do not over tighten the cam screws A B NOTE: Make sure arrows on each cam point toward nearest edge with holes 1 Insert 3 cam screws, 2 cams and 2 wood dowels into left and right side panels as shown. Secure, but do not over tighten cam screws with a phillips head screwdriver. Make sure arrows on each cam point toward nearest edge with holes. 2 A) Insert 4 cams and 4 wood dowels into shelf as shown. B) Insert 3 cams and 2 wood dowels into crossbar as shown.
PAGE 3
ABBOTT NIGHTSTAND NOTE: Do not over tighten the screws 5 Position unit upright as shown. Fit dowels of assembly into corresponding holes of top panel as shown. Secure all cams. 7 Attach left and right drawer sides to drawer front with 4 large screws as shown, using a screwdriver. Made in Vietnam - r04 6 Attach back panel to back of assembly with 14 small screws as shown. Secure, but do not over tighten, screws with a screwdriver.
PAGE 4
ABBOTT NIGHTSTAND 9 Attach drawer back to drawer sides with 4 large screws as shown. 10 Fit drawer glides of drawer assembly into corresponding glides of nightstand as shown. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. Made in Vietnam - r04 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.