Assembly Instruction

ABBOTT MEDIA GAMING TOWER
Made in China - r06 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 Fit dowels of left and right side panels into
corresponding holes of fixed shelf and bottom panel
and secure each with 4 bolts as shown. Secure, but do
not over tighten, the bolts with a phillips head
screwdriver.
2 Fit dowels of left and right side panels into
corresponding holes of top panel and secure with 4
bolts as shown, using a screwdriver.
4 With the assistance of another adult, position
assembled unit upright as shown. Attach back panel with
12 screws, using a screwdriver. Do not over tighten the
screws.
left side
panel
right side
panel
fixed shelf
top panel
back panel
NOTE: Do not over
tighten the bolts
NOTE: Do not over
tighten the screws
bottom
panel
5 Attach 2 hinges to door front with 2 screws per
hinge as shown, using a screwdriver.
door front