Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Abbott Media-Gaming Tower

COMPONENTS

Made in China - r06 Page 1 of 4

Thank you for purchasing the Abbott Media Gaming

Tower. This page lists all the contents included in the

box. Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ABBOTT MEDIA GAMING TOWER

1 - fixed shelf

1 - small

shelf

1 - top panel

2 - large

shelves

2 - side panels

(1 left, 1 right)

1 - back panel

1 - door

front

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387 for replacements.

12 - wood

dowels

12 - shelf

pins

phillips head screwdriver

(We recommend the use of hand tools instead power tools)

1 - bottom

panel

12 - bolts

2 - hinges

2 - hinge

plates

left and right

side panel

1 Insert 6 wood dowels into left and right side panels

as shown.

WALL MOUNTING HARDWARE

1 - wall strap

1 - wall screw

24 - screws

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (4 pages)

PAGE 1
ABBOTT MEDIA GAMING TOWER ASSEMBLY HARDWARE 12 - bolts 24 - screws 12 - wood dowels 12 - shelf pins 2 - hinges 2 - hinge plates WALL MOUNTING HARDWARE 1 - wall strap Thank you for purchasing the Abbott Media Gaming Tower. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ABBOTT MEDIA GAMING TOWER NOTE: Do not over tighten the bolts right side panel top panel fixed shelf left side panel bottom panel 1 Fit dowels of left and right side panels into corresponding holes of fixed shelf and bottom panel and secure each with 4 bolts as shown. Secure, but do not over tighten, the bolts with a phillips head screwdriver. 2 Fit dowels of left and right side panels into corresponding holes of top panel and secure with 4 bolts as shown, using a screwdriver.
PAGE 3
ABBOTT MEDIA GAMING TOWER Refer to Hinge Adjustment diagram for adjusting the alignment of the door hinges HINGE ADJUSTMENTS A If the doors do not appear aligned, refer to the instructions below: 1) Side to side adjustment: Loosen screw A, adjust gap with screw B and re-tighten screw A. B 1 NOTE: Door can be attached to either side of assembled unit. Pilot holes on both sides. A B door front 6 A) Attach 2 hinge plates to assembled unit as shown. Secure each hinge plate with 4 screws.
PAGE 4
ABBOTT MEDIA GAMING TOWER SAFETY MOUNTING INSTRUCTIONS For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A. Insert wall screw (not included) through end of wall strap and into wall as shown. B. Insert wall screw (included) through end wall strap and into the top back of unit as shown.