Assembly Instruction

Page 4 of 5
ABBOTT
LOW CABINET
Made in China - r02 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
9 Fit crossbar into assembled unit and secure with 5
crossbar screws as shown, using a screwdriver.
Assembly is now complete.
crossbar
2) Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise.
3) Height adjustment:
Loosen screw C, adjust
door height and re-
tighten screw C.
C
C
3
HINGE ADJUSTMENT
If the doors do not appear square or aligned,
loosen or tighten the appropriate screws on
each case hinge as illustrated.
A
B
1
1) Side to side adjustment:
Loosen screw A, adjust gap
with screw B and re-tighten
screw A.
A
B
2