Assembly Instruction

ABBOTT LOW CABINET

Made in China - r02 Page 2 of 5

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

left and right

side panel

1 A) Insert 5 wood dowels into left and right side

panels as shown.

B) Insert 4 cams into bottom panel as shown. Make sure

arrows on each cam point toward nearest edge with

holes.

front frame

2 With the assistance of another adult, place front frame

onto a clean, padded surface as shown. Insert 11 wood

dowels and 4 cam screws into front frame as shown.

Secure, but do not over tighten, each cam screw using a

phillips head screwdriver.

bottom panel

3 Fit dowels of left side panel into corresponding holes

of fixed shelf as shown. Secure left side panel to fixed

shelf with 3 bolts as shown, using a phillips head screw-

driver. Do not over tighten the bolts.

4 Fit dowels of left side panel into corresponding holes

of bottom panel as show. Secure left side panel to

bottom panel with 3 large screws as shown, using a

screwdriver.

left side

panel

NOTE: Do not over

tighten the bolts

fixed

shelf

NOTE: Do not over

tighten the screws

NOTE: Make sure arrows

on each cam point toward

nearest edge with holes

NOTE: Do not over

tighten the cam screws

bottom

panel