Assembly Instruction

COMPONENTS

BOX 1

COMPONENTS

BOX 2

Made in Vietnam - r04 Page 1 of 2

Thank you for purchasing the Abbott Full, Queen or

King Bed. This page lists all the contents included in

the box. Please take time to identify the hardware as

well as the individual components of this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect

them from damage.

Note: 2 people are required to safely assemble this product.

ABBOTT FULL, QUEEN OR KING BED

1 - headboard 1 - footboard

2 - center support

legs

HARDWARE

TOOLS REQUIRED

Missing hardware? Please call 800.606.6387 for replacements.

8 - wood

dowels

8 - bolts 8 - flat

washers

8 - spring

washers

phillips head screwdriver

allen wrench (included)

(We recommend the use of hand tools instead power tools)

4 - screws

1 - slat assembly 2 - side rails

(1 left, 1 right)

1 - center

support rail

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

PAGE 1
ABBOTT FULL, QUEEN OR KING BED HARDWARE 8 - wood dowels 4 - screws 8 - bolts 8 - flat washers 8 - spring washers Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Abbott Full, Queen or King Bed. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
ABBOTT FULL, QUEEN OR KING BED NOTE: Do not over tighten the bolts 1 Insert 4 wood dowels into headboard and footboard. Fit dowels of headboard and footboard into left and right side rails, and attach each bracket with 2 bolts, 2 spring washers, 2 flat washers as shown. Secure, but do not over tighten, bolts with an allen wrench. 2 Attach 2 center support legs to center support rail as shown. Turn support legs counter-clockwise to secure.