Assembly Instruction

TOOLS REQUIRED

COMPONENTS

ASSEMBLY HARDWARE

MOUNTING ASSEMBLY HARDWARE

1 - wall strap 1 - large

screw

Made in China - r01 Page 1 of 2

Thank you for purchasing the Abbott Plasma Back

Panel. This page lists all the contents included in the

box. Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ABBOTT PLASMA BACK PANEL

Missing hardware? Please call 800.606.6387 for replacements.

16 - bolts

1 - back

panel

2 - connecting brackets

1 - media

stand

(We recommend the use of hand tools instead of power tools)

ASSEMBLY

1 A) With the assistance of another adult, place back panel face down

onto a clean, padded surface as shown. Attach 2 connecting brackets to

back panel with 4 bolts per bracket. Secure, but do not over tighten,

bolts with a phillips head screwdriver.

B) With the assistance of another adult, position unit upright. Position

back panel onto media stand as shown, and attach with 4 bolts per

bracket.

phillips head screwdriver

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

media stand

(sold separately)

back panel

NOTE: Do not over

tighten the bolts

back panel

PAGE 1
ABBOTT PLASMA BACK PANEL ASSEMBLY HARDWARE 16 - bolts MOUNTING ASSEMBLY HARDWARE 1 - wall strap 1 - large screw Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED phillips head screwdriver (We recommend the use of hand tools instead of power tools) COMPONENTS Thank you for purchasing the Abbott Plasma Back Panel. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
ABBOTT PLASMA BACK PANEL NOTE: Wall mounting hardware is not included. The plasma back panel is intended for placement against a wall. If you are unsure about your wall type or what mounting method you should purchase, consult a qualified professional or your local hardware store. It is important that you use the wall anchor appropriate for your wall type. 2 C) Insert 1 large screw through wall strap and into unit as shown. A) If possible, fasten wall strap to a wall stud.