Assembly Instruction

Page 6 of 6
2) Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw
3) Height adjustment:
Loosen screw C, adjust
door height and re-
tighten screw C.
HINGE ADJUSTMENT
If the doors do not appear square or aligned,
loosen or tighten the appropriate screws on
each case hinge as illustrated.
1)
Side to side adjustment:
Loosen screw A, adjust gap
with screw B and re-tighten
screw A. A.
2
A
C
3
A
B
1
C
ABBOTT
65” MEDIA STAND
Made in China - r03 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
small wall
screw
wall
strap
large
wall screw
(not included)
(NOTE: Additional
screw not included.
Please consult your
local hardware store.)
3/4”-1”
OPTIONAL SAFETY MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential
to use wall anchors appropriate to your wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.
A. Insert large wall screw (not included) through end of wall strap
and into wall as shown.
B. Insert small wall screw through end wall strap and into the top
back of unit as shown.
Mounting assembly is now complete.
NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your
local hardware store.
WALL
NOTE: Insert screws 3/4"-1"
from the edge of the strap