Assembly Instruction

ABBOTT 65” MEDIA STAND

Made in China - r03 Page 2 of 6

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 A) Insert 4 wood dowels into bottom panel as

shown.

B) Fit dowels of bottom panel into corresponding holes

of left and right partitions as shown.

2 Secure bottom panel with 8 large screws as shown,

using a phillips head screwdriver. Do not over tighten

the screws.

3 Insert 2 wood dowels into left and right side

panels as shown.

4 Position assembly as shown. Fit dowels of left and

right side panels into corresponding holes of bottom

panel. Secure each side panel with 3 bolts as shown,

using a screwdriver. Do not over tighten the bolts.

bottom panel

right partition

left partition

right partition

left partition

bottom panel

left and right

side panels

left side panel

right side panel

bottom

panel

NOTE: Do not over

tighten the bolts

NOTE: Do not over

tighten the screws

NOTE: Make sure pre-installed

door stops of left and right partitions

are assembled towards the front

of assembly as shown