Assembly Instruction

ABBOTT MEDIA STAND
Made in China - r12 Page 3 of 6
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
5 Fit dowels of bottom partition into corresponding
holes of bottom panel. Secure with 4 large screws as
shown.
6 Attach leg to bottom panel of assembly. Turn leg
clockwise to secure.
bottom
panel
leg
left side
panel
right side
panel
A
A
C
B
7 A. Fit dowels of left and right side panels into
corresponding holes of assembled unit as shown and
secure each side with 3 bolts.
B.Insert 6 cams into bottom panel as shown. Make
sure arrows on each cam point toward nearest edge
with holes.
C. Using a screwdriver, turn each cam clockwise until
it securely engages each cam screw.
NOTE: Make sure arrows on
each cam point toward nearest
edge with holes