Assembly Instruction

ABBOTT MEDIA STAND
Made in China - r12 Page 2 of 6
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
NOTE: Do not over
tighten the cam screws
left and right
side panel
1 A) Insert 4 wood dowels and 3 cam screws into left
and right side panels as shown. Secure, but do not over
tighten, cam screws using a phillips head screwdriver.
B) Insert 8 wood dowels into top panel as shown.
top panel
2 A) Insert 4 wood dowels into bottom partition as
shown.
B) Insert 2 wood dowels into middle panel as shown.
middle panel
bottom
partition
3 Fit dowels of middle panel into corresponding holes
of top partition as shown. Secure with 4 large screws
using a screwdriver. Do not over tighten the screws.
middle panel
top
partition
A
B
A
B
NOTE: Do not over
tighten the screws
NOTE: Do not over
tighten the bolts
4 Fit dowels of middle panel into corresponding holes
of bottom partition as shown. Secure with 3 bolts using
a phillips head screwdriver.
bottom
partition
NOTE: Make sure partitions
are oriented during assembly
as shown