Assembly Instruction

Page 5 of 5
ABBOTT
52” MEDIA STAND
Made in China - r07 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
OPTIONAL SAFETY MOUNTING
INSTRUCTIONS
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential
to use wall anchors appropriate to your wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.
A. Insert small wall screw through end wall strap and into the top
back of unit as shown.
B. Insert large wall screw (not included) through end of wall strap
and into wall as shown.
Mounting assembly is now complete.
NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your
local hardware store.
small wall
screw
NOTE: Insert screws 3/4"-1"
from the edge of the strap
2) Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise.
3) Height adjustment:
Loosen screw C, adjust
door height and re-
tighten screw C.
C
C
3
HINGE ADJUSTMENT
If the doors do not appear square or aligned,
loosen or tighten the appropriate screws on
each case hinge as illustrated.
A
B
1
1) Side to side adjustment:
Loosen screw A, adjust gap
with screw B and re-tighten
screw A.
A
B
2
wall
strap
large
wall
screw
(NOTE: Additional
screw not included.
Please consult your
local hardware store.)
WALL
3/4”-1”