Assembly Instruction

ABBOTT 52” MEDIA STAND
Made in China - r07 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
left and right
side panel
1 Insert 2 wood dowels into left and right side panels
as shown.
top panel
2 A) Insert 6 wood dowels into top panel as shown.
B) Insert 2 wood dowels into bottom panel as shown.
bottom panel
3 Fit dowels of bottom panel into corresponding holes
of partition as shown. Secure partition to bottom panel
with 4 large screws as shown, using a phillips head
screwdriver. Do not over tighten the screws.
4 Position assembled unit as shown. Fit dowels of left
and right side panels into corresponding holes of
bottom panel as shown. Secure each side with 3 bolts
using a screwdriver. Do not over tighten the bolts.
left side
panel
partition
B
A
NOTE: Do not over
tighten the screws
bottom panel
right side
panel
NOTE: Do not over
tighten the bolts