Assembly Instruction

Made in China - r03 Page 2 of 2
ABBOTT
52” PLASMA MOUNTING PANEL
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do
not use abrasive cleaners. Do not use furniture wax
or polish as the wood is finished with a protective
clear lacquer.
SAFETY MOUNTING INSTRUCTIONS
This plasma mounting panel is intended for placement against a
wall using the enclosed anchoring hardware. The included
hardware is for mounting the unit to drywall. Use hardware
appropriate to your wall type.
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential
to use wall anchors appropriate to your wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.
A. Insert wall screw (not included) through end of wall strap and
into wall as shown.
B. Insert wall screw (included) through end wall strap and into the
top back of unit as shown.
Mounting assembly is now complete.
NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your
local hardware store.
wall
screw
wall
strap
wall
screw
(NOTE: Additional
screw not included.
Please consult your
local hardware store.)
WALL
NOTE: Insert screws 3/4"-1"
from the edge of the strap
NOTE: Contact your television manufacturer to
find out the necessary wall mounting bracket and
instructions needed to safely mount your TV.
Crate and Barrel drivers are not authorized to
mount your TV.