Assembly Instruction

Page 5 of 5
ABBOTT
CORNER MEDIA STAND
Made in China - r07 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive
cleaners. Do not use furniture wax or polish as the wood is finished
with a protective clear lacquer.
13 A) Secure corner back panels to top panel with 4
small screws as shown.
B) Secure back panel to top panel with 4 large screws
as shown.
Assembly is now complete.
12 A) Insert 8 shelf pins into assembled unit at desired
shelf heights.
B) Place 2 adjustable shelves onto shelf pins as shown.
Make sure shelves are securely supported by each shelf
pin.
C) At this point, cover all exposed cams with cam covers.
adjustable
shelf
shelf pin
A
B
A
B
A
back panel
corner
back panel
corner
back panel
SAFETY MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential
to use wall anchors appropriate to your wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.
A. Insert wall screw (not included) through end of wall strap and
into wall as shown.
B. Insert wall screw (included) through end wall strap and into the
top back of unit as shown.
Mounting assembly is now complete.
NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your
local hardware store.
wall
screw
wall
strap
wall
screw
(NOTE: Additional
screw not included.
Please consult your
local hardware store.)
WALL
NOTE: Insert screws 3/4"-1"
from the edge of the strap