Assembly Instruction

Page 4 of 5
ABBOTT
CORNER MEDIA STAND
Made in China - r07 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
11 A) Place asembled unit upright. With the assistance of
another adult, fit dowels of assembled unit into corre-
sponding holes of top panel as shown. Secure top panel
to front frame with 4 bolts as shown, using a screwdriver.
Do not over tighten the bolts.
B) Secure top panel to partition with 3 bolts as shown.
C) Secure top panel to left and right side panels with 2
bolts per side as shown.
9 Attach back panel to assembled unit with 3 large
screws as shown. Secure using a screwdriver.
10 A) Fit 2 corner back panels into corresponding groove of
left and right side panels as shown.
B) Secure each corner panel to assembled unit with 5 small
screws using a screwdriver.
corner back
panel
corner back
panel
back
panel
NOTE: Do not over
tighten the bolts
A
B
A
B
C
C
top panel
A
B
B
NOTE: Make sure holes
of side panels are positioned
as shown