XT30RC XT30RC Guitar Amplifier User’s Guide
XT30RC Guitar Amplifier Congratulations! You are now the proud owner of the Crate XT30RC Guitar Amplifier. This rugged amplifier features a Clean channel with a three band EQ and level control, and a Solo channel with our patented FlexWave technology, gain, Level and Shape control. A Reverb control and a switchable Chorus with Depth and Rate controls are provided for greater flexibility.
XT30RC Guitar Amplifier The Front Panel: 1 2 3 4 5 6 7 8 1: INPUT: Use this jack to connect your guitar to the amplifier by means of a shielded instrument cable. SOLO CHANNEL: A high gain channel designed to give you sounds from a slight edge to serious overdrive. 2: GAIN: Use this control to adjust the amount of distortion for the Solo channel. 3: SHAPE: Use this control to adjust to tone of the Solo channel. 4: LEVEL: Use this control to adjust the output level of the Solo channel.
XT30RC Guitar Amplifier XT30RC TECHNICAL SPECIFICATIONS: Output Power Rating Gain >30W RMS @ 5% THD, 4Ω, 120 VAC Solo Ch Clean Ch 98dB +/-6dB @ 1kHz 42dB +/-6dB @ 1kHz CD Input 26dB +/-2dB Maximum Input Signal Accepted 6 volts peak-to-peak min. @ 1kHz Tone Controls Low Mid High 20dB range @ 80Hz 12dB range @ 900Hz 18dB range @ 10kHz Speaker Size and Rating 10” Crate Custom Design 4 ohm Power Requirements 120 VAC, 60Hz, 50VA Size and Weight 15-1/4” H x 17” W x 10” D, 20 lbs.
