XK15 Keyboard Amplifier User’s Guide
XK15 Keyboard Amplifier Congratulations! You are now the proud owner of the Crate XK15 keyboard amplifier. This compact powerhouse offers warm clean tones and easy-to-use equalization. Each of the two input jacks has its own level control so you can mix your keyboard with another instrument or a Hi-Z vocal mic. The CD input also allows you to play along with your favorite music.
XK15 Keyboard Amplifier 1 2 3 4 5 6 1. INPUT 1: Use this 1/4” jack to connect your keyboard or other line level signal to the amplifier by means of a shielded instrument cable. The signal level at this jack is controlled by the Level 1 knob (#3). 2. INPUT 2: Use this 1/4” jack to connect your keyboard or other line level signal to the amplifier by means of a shielded instrument cable. The signal level at this jack is controlled by the Level 2 knob (#4). 3.
XK15 Keyboard Amplifier XK15 TECHNICAL SPECIFICATIONS: Maximum Input Signal Level Accepted 15 volts peak to peak Input Impedance 35k ohms Signal To Noise Ratio 72dB Output Power Rating 12+ watts RMS @ 5% THD, 4 ohm load – 120 VAC line Low Control 15dB Range @ 50Hz Low Mid Control 12dB Range @ 250Hz High Mid Control 13dB Range @ 1kHz High Control 27dB Range @ 10kHz Input Power Requirements 120 VAC, 60Hz, 30VA 100/110 VAC, 50/60Hz, 30VA 230 VAC, 50/60Hz, 30VA Speaker Size and Rating Crate Cus
