User’s Guide for the C R AT E A U D I O PSM6P Powered Full Range Enclosures Please read this guide before using your new powered speakers!
PSM6P Powered Full Range Enclosures Table of Contents: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Important Saftety Instructions . . . . . . . . . . . . . . . . .3 The Input Plate . . . . . . . . . . . . . . . . . . . . . . . . . .4,5 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 System Block Diagram . . . . . . . . . . . . . . . . . . . . . .7 Technical Specifications . . . . . . . . . . . . .
PSM6P Powered Full Range Enclosures Introduction: Thank you for choosing the Crate Audio PSM6P Powered Full Range enclosures. PSM6P speakers provide exceptional sound quality in a rugged, compact package and are suitable for a wide variety of applications. Each PSM6P features an internal 50 watt power amplifier with gain, eq and level controls. 1/4” Input and Aux Out jacks allow for a variety of system configurations. (Some examples of their application are shown on page 6.
PSM6P Powered Full Range Enclosures The Input Plate: 1 2 3 6 4 7 5 9 8 10 11 4
PSM6P Powered Full Range Enclosures 1. POWER LED: This LED illuminates when the unit is on. The blue LED on the front of the enclosure (not shown) also illuminates when the unit is on. 2. MIC/LINE: Use this switch to set the input for the type of source connected to the Input jack of the PSM6P. For microphones, set the switch to the Mic position (switch depressed). For line level signals, such as the output of a mixer, set the switch to the Line position (switch out). 3.
PSM6P Powered Full Range Enclosures Applications: SAMPLE STEREO CONFIGURATION: PSM6P PSM6P INPUT AUX OUT LEFT OUT INPUT AUX OUT RIGHT OUT CSX42FX TO OPTIONAL ADDITIONAL PSM6P TO OPTIONAL ADDITIONAL PSM6P SAMPLE MONO CONFIGURATION: PSM6P PSM6P MONO OUT INPUT AUX OUT CSX42FX TO OPTIONAL ADDITIONAL PSM6Ps 6 INPUT AUX OUT
PSM6P Powered Full Range Enclosures System Block Diagram: MIC/ LINE INPUT GAIN TONE VOLUME HIGH FREQ DRIVER POWER AMP XO LOW FREQ DRIVER AUX OUT 7
PSM6P Powered Full Range Enclosures Technical Specifications: Cabinet Type Molded High-Impact Polymer Power Handling 50W (RMS), 80W peak Drivers Low Frequency High Frequency 6.5” woofer Dome tweeter Sensitivity 91dB (1W @ 1m) Rated Maximum SPL 112dB Frequency Response 80Hz - 20kHz Controls Gain, Tone, Volume; Mic/Line switch Input / Aux Out Connectors 1/4” Input jacks Power Requirements 120VAC, 60Hz, 70VA 100/115VAC, 50/60Hz, 70VA 230VAC, 50/60Hz, 70VA Dimensions H x W x D 14.17”H x 7.
