GTX30 Guitar Amplifier with DSP User’s Guide
GTX30 Guitar Amplifier with DSP Congratulations and thank you for choosing the Crate GTX30 Guitar Amplifier with Digital Signal Processing. This rugged amplifier features a Clean channel with a three-band EQ and level control, and a Solo channel with our patented FlexWave technology, Gain, Level and Shape control. An easy to operate DSP section lets you dial in a variety of digital effects including reverbs, delays, octave and wah-wahs.
GTX30 Guitar Amplifier with DSP The Front Panel: 1 2 3 4 5 6 7 8 1: INPUT: Use this 1/4” jack to connect your guitar to the amplifier by means of a shielded instrument cable. SOLO CHANNEL: A high gain channel giving you sounds from a slight edge to serious overdrive. 2: GAIN: Use this control to adjust the amount of distortion for the Solo channel. 3: SHAPE: Use this control to adjust the tone of the Solo channel. 4: LEVEL: Use this control to adjust the output level of the Solo channel.
GTX30 Guitar Amplifier with DSP GTX30 TECHNICAL SPECIFICATIONS: Output Power Rating >30W RMS @ 5% THD, 4Ω, 120 VAC Gain Solo Ch 98dB +/-6dB @ 1kHz Clean Ch 42dB +/-6dB @ 1kHz Maximum Input Signal Accepted Tone Controls 6 volts peak-to-peak min.
