- CrateThunderBass Amplifier Owner's Manual

Using the Biamp Capabilities – BX-4115:
8
BX-440H / BX-4115
BX-440H / BX-4115 ThunderBass Amplifier
Example 1:
With the BX-4115 for the low end; a
BX-220H and a BXE-410H cabinet
for the high end:
Plug your bass into the BX-4115, then:
(1) Run a shielded cable from the biamp
low out jack of the BX-4115 to its power
amp in jack. (Connection to the BX-
4115’s speaker is already made through
the factory-installed speaker out cable.)
(2) Run a shielded cable from the biamp
high out jack of the BX-4115 to the power
amp in jack of the BX-220H.
(3) Run a speaker cable from the speaker
out jack of the BX-220H to the input jack
of the BXE-410H.
Adjust the Crossover Frequency and
Balance controls for the best sound.
MADE IN THE U.S.A.
BY SLM ELECTRONICS
1400 FERGUSON AVE.
PREAMP
OUT
EFFECTS
LOOP
BALANCED
LINE OUT
PWR AMP
IN
RETURN
SEND
S
P
E
A
K
E
R
S
150W @ 8 OHMS
220W @ 4 OHMS
MIN. LOAD
BX-220H
BXE-410H
BX-220H
BXE-410H
MADE IN THE U.S.A.
BY SLM ELECTRONICS
1400 FERGUSON AVE.
ST. LOUIS, MO 63133
HIGH
OUT
47-146-04
SERIAL #
MODEL: CRATE BXE-18
POWER HANDLING: 200 WATTS
IMPEDANCE: 8 OHMS
CROSSOVER FREQUENCY: 200Hz
DIRECT
IN
CROSSOVER
INPUTS
MADE IN THE U.S.A.
BY SLM ELECTRONICS
1400 FERGUSON AVE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE.
AVIS: RISQUE DE CHOC
ELECTRIQUE. NE PAS OUVRIR.
MODEL
SERIAL #
1200W MAX / 120V / 60Hz
BX-440H
CAUTION: CHASSIS SURFACE HOT.
ATTENTION: SURFACIE DE CHASSIS CHAUDE.
AC LINE IN
BX-4115
1
PREAMP
OUT
EFFECTS
LOOP
BALANCED
LINE OUT
PWR AMP
IN
RETURN
SEND
S
P
E
A
K
E
R
S
150W @ 8 OHMS
220W @ 4 OHMS
MIN. LOAD
3
2
from
bass
TO
BXE-410H
2
1
3
TO
BX-4115
Example 2:
With the BX-4115 for the low end; a
BX-2115 for the high end:
Plug your bass into the BX-4115, then:
(1) Run a shielded cable from the biamp
low out jack of the BX-4115 to its power
amp in jack. (Connection to the BX-
4115’s speaker is already made through
the factory-installed speaker out cable.)
(2) Run a shielded cable from the biamp
high out jack of the BX-4115 to the power
amp in jack of the BX-2115. (Connection
to the BX-2115’s speaker is already made
through the factory-installed speaker out
cable.)
Adjust the Crossover Frequency and
Balance controls for the best sound.
BX-2115
MADE IN THE U.S.A.
BY SLM ELECTRONICS
1400 FERGUSON AVE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE.
AVIS: RISQUE DE CHOC
ELECTRIQUE. NE PAS OUVRIR.
MODEL
SERIAL #
1200W MAX / 120V / 60Hz
BX-440H
CAUTION: CHASSIS SURFACE HOT.
ATTENTION: SURFACIE DE CHASSIS CHAUDE.
AC LINE IN
BX-4115
1
MADE IN THE U.S.A.
BY SLM ELECTRONICS
PREAMP
OUT
EFFECTS
LOOP
BALANCED
LINE OUT
PWR AMP
IN
RETURN
SEND
S
P
E
A
K
E
R
S
150W @ 8 OHMS
220W @ 4 OHMS
MIN. LOAD
BX-2115
BX-4115
PREAMP
OUT
EFFECTS
LOOP
BALANCED
LINE OUT
PWR AMP
IN
RETURN
SEND
S
P
E
A
K
E
R
S
150W @ 8 OHMS
220W @ 4 OHMS
MIN. LOAD
2
TO
BX-2115
TO
BX-4115
2
1
from
bass