412A 412B Guitar Speaker Enclosures Owner’s Manual
FlexWave412A/B Guitar Enclosure Introduction Congratulations! You are now the proud owner of the Crate FlexWave 412A or 412B guitar amplifier loudspeaker enclosure. The FlexWave 412A/B guitar cabinets are built from the finest materials and components available. The cabinets are carefully constructed and then covered with extremely tough fabric-backed vinyl. The cabinets are then loaded with four custom designed 12" speakers.
FlexWave412A/B Guitar Enclosure The Input/Output Plate: 1. Impedance Selector Switch: Use this switch to select 16 ohm mono operation or 8 ohm stereo/4 ohm mono operation. 2. Out 1/4" Jack: When using the cabinet in the mono operating mode, use this jack to connect the cabinet to another speaker enclosure of the same impedance. 3. In/Left 1/4" Jack: When using the cabinet in the mono operating mode, use this jack as the cabinet’s input jack.
FlexWave412A/B Guitar Enclosure FlexWave 412A/B Technical Specifications: Impedance 4 or 16 ohms Mono, 8 ohms Stereo RMS Power Rating 120 watts Mono, 60 watts Stereo Peak Power Handling 240 watts Mono, 120 watts Stereo Frequency Response 80 Hz – 5 kHz Sensitivity 96 dB SPL 1 watt/1 meter Maximum SPL 118 dB Transducers (4) Custom Design 12" 16 ohm 30 watt speakers Full Range Inputs (3) 1/4" jacks: Mono In/Out, Stereo Left and Right Dimensions (H x W x D) 31.5 in x 30.0 in x 14.0 in 80.
