User Manual

• FROM MIST LID: Turn control knob down
• FROM TANK: Check for any possible cracks in tank or around seam
• FROM BASE: Call Crane Customer Care
HUMIDIFIER IS LEAKING
• Area tap water may have too many minerals. Change to filtered or distilled water, or
purchase a Crane demineralization filter cartridge. (www.crane-usa.com)
WHITE DUST APPEARS & SETTLES OUTSIDE THE HUMIDIFIER
• Complete weekly maintenance. (see page 5)
• Humidifier should be on a hard flat surface so the fan vent is not being blocked.
• Try turning control knob up to MAX and let run for 10 minutes.
INDICATOR LIGHT IS GREEN, BUT THERE’S NO MIST
• Clean the Water Tank with a water & white vinegar solution and rinse with clean water.
• Leave the empty Water Tank open in a cool place for 12 hours without Water Tank
Cap attached.
THERE IS A STRANGE ODOR
• Ensure unit is properly plugged into a power outlet / try another power outlet.
• Check the Control Knob is turned to the ON position.
• If Power On indicator light does not come on, contact Crane Customer Care.
HUMIDIFIER DOES NOT HAVE ANY POWER
• Ensure the cap is secured properly to the tank to allow water to pass through to the base.
• The base may be overfilled: Remove the tank, empy the base & replace the filled tank
on the empty base.
• Clean Water Level Sensor: Pull off the plastic cap from the peg. Remove the water level
sensor float and clean with warm sudsy water. Replace parts by first putting the float
onto the peg then replacing the plastic cap on the peg. (see diagram on page 3)
INDICATOR LIGHT IS STAYING RED
DO NOT attempt to repair the motor or nebulizer yourself.
If the humidifier continues to not operate, please contact Crane Customer Care.
TROUBLE SHOOTING
888-599-0992 (Mon - Fri 9:00am - 4:00pm CST)
[e-mail]
LIVE CHAT (available at www.Crane-USA.com)
CRANE CUSTOMER CARE