User Manual

SET THE CORRECT HUMIDITY OUTPUT:
Adjust the control knob so the mist rises up to
be absorbed by the room air. If mist drops
quickly, turn down control knob until it is rising up.
To reduce excessive humidity, especially in small
rooms, leave the room door open and adjust
to a lower mist intensity.to a lower mist intensity.
YES NO
Always carry with 2 Hands
when tank is filled with water
SET BASE IN DESIRED LOCATION BEFORE FILLING THE TANK.
Moving humidifier while tank is placed on the base may cause leakage or overfilling of the base.
1. Turn water tank upside down, unscrew the Water Tank Cap and fill with
cool water only.
• fill water all the way to the rim
• add medication, essential oils, or salt
• carry by handle when full of water
3. Screw Cap back onto tank, turn over
and place on the humidifier base.
4. Plug the power cord in and use the control knob to turn on. Indicator light
will turn green & within seconds, mist will begin rising through the mist lid.
5. Use the control knob to adjust the inensity of the mist output.
6. As a safety feature, when the humidifier runs out of water, the power
indicator light will turn red & the mist output will stop to prevent damaging
the Nebulizer. Turn the humidifier off and unplug the unit before removing
and refilling the water tank.
ASSEMBLY INSTRUCTIONS