Specifications

5
HOW TO ASSEMBLY
1. Lay fan main body gently on floor, take the base (3) and place power cord (6) in
the cord groove.
2. Attach the fan body and the base by tightening the base screws (4) with a
screwdriver.
3. Sccure power cord (6) to base (3) with clamp screws (5).
HOW TO USE
How to extract the remote controller
The remote controller can be extracted from remote controller holder, at top of rear enclosure as
shown.
Note: Before first use, remove
clear plastic sticker
How to operate controls
On - Green
Off - Light Off
To Start or stop the fan
Low speed - Red
Mid speed - Orange
High speed -Green
To adjust the Speed Level of the fan:
Low / medium / high
On -Green
Off - Light off
To start or stop the oscillation of fan
On -Green
Off - Light off
To switch the LED light on or off for the
clock
2 hours - Red
4 Hours - Orange
8 hours - Green
To set the timer level: 2 / 4 / 8 hours