User Guide

7
CAUTION
• DO NOT plug or unplug the Power Cord with wet hands as electric shock could occur.
• Do not use the unit when the power cord or plug is broken, or the socket is loose.
• Do not switch the unit on when the water tank is full or when the unit is upside down.
ASSEMBLY & USE
This dehumidifier is designed for removing excess moisture from small spaces such as
bathrooms, boats, closets, laundry rooms and small offices.
Plug in the unit’s power plug into a 120V AC electrical outlet. Please use an AC electrical
outlet as stated on the label. A higher voltage may lead to a malfunction causing fire or
electric shock.
CONTROL PANEL
TIMER POWER SPEED
• ON and OFF: Press the Power button to turn the appliance ON. Press the Power button
again to turn the appliance OFF. When the appliance is ON, the Power indicator light will
turn blue. The default fan setting speed will be high.
• To Set the Dehumidifying Speed: Press the Speed button to choose “L” for low speed
mode or choose “H” for high speed mode. Low speed mode is suitable for condition with
less moisture or night use. High speed mode with higher dehumidifying efficiency is suitable
for condition with more moisture or day use.
• To Set the Timer: Press the Timer button to set the operation time. The unit will
automatically turn off after the set period of time. The unit can be set to turn off after 4 or 8
hours.
WHEN TANK IS FULL OF WATER:
The dehumidifier will stop working when water tank
is full and the Power indicator light will turn red. To
continue using the unit, remove the water tank,
empty it, and place the water tank back into the unit,
as shown in the right diagram.
ATTENTION: Do not re-use or consume the
water collected in the tank as it may contain
germs, bacteria, fungi, and microorganisms.