Use and Care Manual

CAUTION

• DO NOT plug or unplug the Power Cord with wet hands as electric shock could occur.

• Do not use the unit when the power cord or plug is broken, or the socket is loose.

• Do not switch the unit on when the water tank is full or when the unit is upside down.

ASSEMBLY & USE

Plug in the unit’s power plug into a 120V AC electrical outlet. Please use an AC electrical

outlet as stated on the label. A higher voltage may lead to malfunction causing fire or electric

shock.

CONTROL PANEL

TIMER POWER SPEED

• ON and OFF: Connect the power plug to the appropriate electrical outlet. Press the Power

button to turn the appliance ON. The default fan setting speed will be high. Press the Power

button again to turn the appliance OFF. When the appliance is ON, the Power indicator light

will turn blue.

• To Set the Dehumidifying Speed: Press the Speed button to choose “L” for low speed

mode or choose “H” for high speed mode. Low speed mode is suitable for condition with

less moisture or night use. High speed mode with higher dehumidifying efficiency is suitable

for condition with more moisture or day use.

• To Set the Timer: Press the Timer button to set the operation time. The unit will

automatically turn off after the set period of time. The unit can be set to turn off after 4 or 8

hours.

WHEN TANK IS FULL OF WATER:

The dehumidifier will stop working when water tank

is full and the Power indicator light will turn red. To

continue using the unit, remove the water tank,

empty it, and place the water tank back into the unit,

as shown in the right diagram.

ATTENTION: Do not re-use or consume the

water collected in the tank as it may contain

germs, bacteria, fungi, and microorganisms.