Owners Manual

CONFIGURATION
Built in Pad
Scale type
Set up for the Solaris could not be easier.
Plug up your in and outputs, power up and you're ready to go.
Whenever the unit is switched on the unit will be muted.
The MUTE button on the front mutes and un-mutes the Main outputs.
An LCD Function Display shows Source, Sample Rate (upto 192kHz), Main output and
Headphone Gain.
The display also has a set of Left/Right level meters.
When you power up the Solaris and hold down the MUTE button until the red SOLARIS name
switches to full black screen, you'll engage the Setup Menu.
Whenever the unit is switched on, all outputs of the unit will be muted. Once un-muted the
headphone out will no longer be affected by the MUTE function.
8
CHANGED BY THE GAIN KNOB
IN SETUP MODE
CHANGED BY THE SOURCE
KNOB IN SETUP MODE