Operator`s manual

Specifications
* An external fitment is required to enable the Profile machine to support cashless operation
All weights and dimensions are approximate and are for guidance only.
Water Filter - External Fitment (where fitted)
The machine may be fitted with either an Everpure or Brita filter head and filter
cartridge. This unit will be located either within the machines base cabinet (where
applicable) or in the water supply line.
To maintain optimum drink quality, the cartridge should be replaced every six months
or earlier, depending upon the number of vends.
4
Operator’s Manual
Profile Contour
Height 985 mm 985 mm
Depth 590 mm 590 mm
Width 540 mm 660 mm
Weight 105 kg 184 kg
Electrical Services
(i) Voltage 220 - 240 Volts AC
(ii) Current 13 Amp Fused
(iii) Frequency 50 Hz
Water Services
(i) Pressure 100 Kpa (1 Bar) - 800 Kpa (8 Bar)
(ii) Stopcock 15 mm BSP from rising main
Cup Capacity 350 (when using 7oz squat cups)
Cup Type 7oz squat, 7oz tall and 9oz tall versions of the HIPS vending cup
may be used although modification to the machine will be
required to change between cup types
Coin Mechanism Coin mechanisms and cashless card systems*
can be fitted on request