Operator`s manual

23
Operator’s Manual
Sub Programs
The 10 sub programs within the Operator’s Program are shown in the following
diagram - figure 2.
Figure 2
To access a sub program within the Operator’s Program, enter the programming mode
as described previously.To step through the sub programs, press either the up (
▲) or
down (
▼) keys.To enter a displayed sub program, press the access key.
Operations Sub-Program
Upon entry into the operations sub program, pressing the access key on the keypad
will display the ‘Service’ function. Pressing the access key again will carry out the
function described.To move to the next function, press the up (▲) or down (▼) keys.
To return to the main menu, press the cancel (C) key.
The operations sub-program is split into seven separate functions:
(a)
Service: When accessed,this function allows the operator to test vend each
drink selection, for example after carrying out the cleaning procedure.
(b)
Self Clean: This function allows the operator to program two periods
during the day when the machine will automatically flush through the entire
water system.