Operator`s manual

13. Remove the coin mechanism cover (where fitted).

Wipe the inside of the coin mechanism with a damp

cloth.

Check the coin tubes and refill as required.

14. Restore power to the machine using the safety key

as shown in the illustration.

Press the

program entry switch, located in the

switch panel on the rear of the door and enter the

correct operator code - selection button 1 followed

by 7.

Proceed as follows:-

(i) Press the

flush switch and check that all of the

mixing stations are water tight.

(ii) Using the

service switch, test vend each drink

selection.

(iii) Press the

view counters switch and record

the audit information.

Remove the safety key and close the door.

Clean and buff the outside of the machine.

Operator’s Manual