Operator`s manual

14
Operator’s Manual
5. Refit the whipper bases (a). Rotate the base anti-
clockwise to lock into position as shown.
Refit the impeller's (b). Line up the dot on the
impeller with the flat on the motor shaft.
Refit mixing chambers, mixing bowls, steam hoods
and dispense pipes.
6. Refit the dispense pipes to mixing chamber outlets.
Refit the plastic dispense block to the dispense head
assembly. Secure with the plastic thumb screw (a).
Ensure that the dispense pipes are located into their
correct positions in the dispense block as shown in
the illustration.
7. With a damp sanitised cloth, remove any ingredient
on the exterior of the canisters, including any
product build-up around the canister outlets.
Check ingredient canisters and refill if required.
Refit the canisters into the machine from left to
right.Ensure that the canisters are refitted correctly.
Weekly: Empty and wash the ingredient canisters.
Dry thoroughly, refill and refit into machine.
8. Remove the freshbrew waste bucket(s), where
fitted, from the machine.
Empty the contents, clean and refit to machine.
a
b
a