Hot Beverage Maker User Manual

HOT DRINK SETUP/PROGRAMMING GUIDE
6700001 Page - 53 November, 2002
noitarugifnoCepyTenihcaM
rofretnE
)W(
noitinifeD
1.esuetanretlarofdevreseR
noitarugifnoCetutitsbuSraguSdnapuoS
rofretnE
)X(
noitinifeD
1.desutonsi5retsinaC
2.etutitsbusragussniatnoc5retsinaC
3.puossniatnoc5retsinaC
SET THE MACHINE TYPE CONFIGURATION CODE
(Supervisor Mode Only)
1. Press , then press until the display shows
Mach.type (x).
Press to enter MACH.TYPE (3).
2. Press . The display shows CONF WXYZ "WXYZ" is
the machine configuration code. W represents the machine type, X
is the soup and sugar substitute configuration, Y is the brewer con-
figuration, and Z is canister mapping. The following tables give the
possible values for each of the four numbers. Enter the appropriate
configuration code for your machine.
3. CONTINUE.