Hot Beverage Maker User Manual

HOT DRINK SETUP/PROGRAMMING GUIDE
6700001 Page - 19 November, 2002
V. ADJUSTMENTS AND MINOR
MAINTENANCE
1. Empty the Bill Stacker
2. Adjust the Water Valves
Water valves do not usually require adjustment, but in some cases adequate water
volume cannot be achieved by the throw time setting alone (see the programming
section). IF ABSOLUTELY NECESSARY, adjust the valves in conjunction with setting
the factory default timers during the Product Configuration programming mode.
1. Using a slotted screwdriver, turn the adjustment screw clockwise to decrease
the water flow rate.
2. Turn the adjustment screw counterclockwise to increase the water flow rate.
WATER VALVE
ADJUSTMENT
SCREW
WATE
R
VALVE
+
-
123456
WATER
6
WATER
TANK