Hot Beverage Maker User Manual

HOT DRINK SETUP/PROGRAMMING GUIDE
6700001 Page - 17 November, 2002
11. Test the Machine:
Your Hot Drink merchandiser is now ready to vend coffee, just as soon as the water
in the tank reaches its operating temperature. Press , and a reading of the
tank temperature is displayed. When the display shows 94° C (202° F), it is ready
for vending.
a. Close the door, make a selection, and enjoy your cup of coffee!
b. You will now need to do the following before your machine is ready to start earning
money:
• Set prices
• Set up the menu
• Establish time of day vending periods (if desired)
• Customize the drink recipes (if desired)
• Set up custom messages (if desired)
Refer to the Programming section for details on these and other procedures.
12. PosiVend:™
PosiVend™ensures that a cup is always available in the cup station before any money
is collected or product delivered. The sensing system is a beam of infra-red light
across the cup station which is broken by the cup when it falls into posi-tion.
The PosiVend™ software monitors the cup station sensor during the time
the cup ring is cycled and for three seconds afterward. If a cup is not
detected, the soft-ware will first determine if a second cup ring with the
same size cups exists and will then try to drop a cup from the second ring.
If the second ring also fails to drop a cup or is not usable, the software will
repeat the attempt from the first cup ring to attempt to clear any jams in the
cup delivery area. Each ring will be tried up to two times. If a cup is still not
detected by the infrared sensor then several things happen:
• Any ring that failed twice in a row is placed temporarily out-of-service for a length
of time that is determined by the user,
• The customer’s credit is either restored for another vend attempt or is returned
automatically,
• Three beeps are sounded and the message SELECT ANOTHER SIZE is flashed if
another size cup ring is available, or the message INSERT MUG is flashed in the event
that no other cups are available. The customer may always get his money back by
pressing the coin return button.
INSERT MUG is the default message.
You may customize this message if desired.