Beverage Dispenser User Manual

Test the Machine HDC II Programming Guide
6730018 65 July, 2003
TEST THE GRINDER(S)
1. Press , then press until the display shows .
2. Press the number key that corresponds to the grinder you want to test. It
will run for one cycle.
3. CONTINUE.
TEST THE AIR
1. Press , then press until the display shows .
2. Press to run the air compressor.
3. CONTINUE.
TEST THE BREWER
1. Press , then press until the display shows .
NOTE
Keep away from the brewer mechanism while it is operating.
Coming into contact with moving parts could injure you.
2. Press to test each brewer position:
=The brewer is in the BREW POSITION.
=The brewer is in the HOME position.
3. CONTINUE.
RINSE THE MIXING BOWLS
1. Press , then press until the display shows .
2. Press to rinse the mixing bowls. The display shows until
the operation is complete.
3. CONTINUE.