User Manual



Auto Power

If Camden EC2 is situated in a rack full of other outboard equipment and preamps, it can be

configured to automatically power on/off when power is switched on from a central location

from inside the rack or a power conditioner when power is detected in its power supply.



To enable Auto Power, you will need to remove Camden EC2’s top panel and move a specific

jumper:



1. Ensure Camden EC2 is powered off and the power connector has been removed. Wait

30 seconds before continuing.

2. Place Camden EC2 on a flat surface and carefully remove the screws fixing the top

panel.

3. Before reaching inside Camden EC2, firmly touch it’s metal chassis to discharge any

built-up static electricity.

4. Locate the ‘Auto Power’ label.

5. Carefully remove the black jumper from the off position and reposition it over both legs

on the to bridge the connection and enable Auto Power On/Off.

6. Re-fix the top panel back onto Camden EC2’s top panel.

