User Manual



Package Contents

So now your Camden EC2 is out of it’s packaging, you’re probably itching to get it powered on

and making music! But before you get started, please read the sections below that will help

guide you through the process of getting Camden EC2 setup, plugged in, and ready-to-record

as quickly as possible!



The following items can be found in the packaging alongside Camden EC2:



- External power adapter

- IEC cable

- Allen key (2mm)

- Quickstart Guide



Rack-Ear Orientations

There’s more to Camden EC2’s rack ears than meets the eye. Camden EC2’s rack ears can be

repositioned in 2 ways to suit particular applications and offer greater protection during

transport.



Standard (Default) - Standard rack ear configuration where the rack ears are mounted

flush to the front panel of Camden EC2.



Recessed - Protective rack ear configuration where the rack ears are brought forward

allowing Camden EC2 to sit backwards into the rack to protect front panel controls

during travelling and location recording.



Depending on your desired use case, you will need to remove the 3 screws securing each rack

ear using the supplied 2mm allen key, realign the rack ears with the correct set of holes, and fix

them firmly back into place.

