User Manual



[1] C.A.S.T. Input: Enables I/O relocation and

expansion via Cranborne Audio C.A.S.T. enabled

breakout boxes.

[7] Preamp Output (+24dBu): Sends balanced,

line-level outputs of each Preamp for connection

to external converters and equipment.

[2] Source Switch: Toggles the input source of each

preamp between C.A.S.T. Input and XLR.

(Switch Down = C.A.S.T. ON)

[8] Aux Input: Connects analogue playback

sources from external audio interfaces directly

into Camden EC2’s monitoring paths. Inputs are

summed with the C.A.S.T. OUT RR Paths.

[3] Preamp Input: Connects balanced XLR analogue

inputs into each Preamp. Input sensitivity varies

depending on the Input Type Switch on the front of

the preamp.

[9] C.A.S.T. Output: Enables Camden EC2 Preamp

signals to be sent directly to the C.A.S.T. Inputs on

another Cranborne Audio device. C.A.S.T. Out also

receives the Aux Mix (inc Talkback) from the

connected 500ADAT/500R8 for monitoring on

Camden EC2’s Aux mixers.

[4] Link Output: Outputs an unaffected, buffered

output to connect downstream equipment such as

guitar amplifiers in parallel to Camden EC2’s Hi-Z and

Line inputs.

[10] Grounding Post: Enables direct binding to

chassis ground to help eliminate ground loops in

specific setups.

[5] Preamp Output (+18dBu): Sends balanced,

line-level outputs of each Preamp for connection to

external converters and equipment.

[11] Power: Provides Camden EC2 with power via

the provided external 24v 1A DC power supply. No

other power supply should be used.

[6] Ground Lift: Lifts the ground of the preamp’s XLR

output to remove ground hum in applicable setups.

(Switch Down = Ground Lift ON)



 