User Manual

ManualsBrandsCranborne Audio ManualsMusical InstrumentsCamden EC2 - 2-CHANNEL MIC / LINE / INSTRUMENT PREAMPLIFIER AND HEADPHONE MIXER WITH HIGH-PASS FILTER



Controls and Connectors



[1] Mojo Control: Adjusts the level of Mojo

analogue saturation. Bypasses Mojo and clicks off

when it’s turned fully anti-clockwise.



[10] 48v Status Indicator: Bicolour LED that

displays 48v status.

Off = 48v Off, voltage fully discharged

Amber = 48v voltage charging/discharging

Red = 48v fully charged

[2] Mojo Style Switch: Toggles the Mojo style

between 2 discrete styles: Thump & Cream.

[11] Ch1 Level Control: Adjusts the level of the

Channel 1 preamp into the Aux bus.

[3] Signal Indicator: Bicolour LED that displays

incoming signal level and clip status.

Blue = -20dBu

Green = -12dBu

Amber = +21dBu

Red = +24dBu

[12] Aux In/C.A.S.T. Level Control: Adjusts the

level of the rear Aux Inputs and C.A.S.T. OUT RR

into the Aux bus.

[4] HPF Switch: Engages the 80Hz High Pass

(Low Cut) filter.

-3dB @ 80Hz.

(Switch Down = ON)

[13] Ch2 Level Control: Adjusts the level of the

Channel 2 preamp into the Aux bus.

[5] Polarity Switch: Inverts the polarity of the

input signal by 180°.

(Switch Down = ON)

[14] Aux Headphone Level: Adjusts the main

level of the Aux bus to the Aux Headphones

output.



[6] Gain Control: 12 position switched pot. Adjusts

the input sensitivity of the preamp from 8 to

68.5dB in 5.5dB increments.

[15] Stereo Pan Switch: Sets the Pan position of

Ch 1 and Ch 2 to the Left and Right sides of the

Aux headphone output for monitoring stereo

signals.

(Switch Down = ON)

[7] Input Type Switch: 3-way switch. Adjusts the

input Impedance and pad status of the preamp

Input to match the desired input type; hi-z, line,

or mic.

[16] Aux Headphone Output: Used for

connecting headphones to the Aux bus.

[8] 48v Switch: Engages 48v phantom power for

the rear XLR input connector.

(Switch Down = ON)

[17] Power Switch: Safely powers on and off

Camden EC2. Tap to power on, press and hold to

power off.

[9] Hi-Z/Line Input: Used to connect line or hi-z

instruments directly into the preamp’s front

panel. Hi-z/Line input interrupts rear XLR or

C.A.S.T. input connections.

