User Manual

ManualsBrandsCranborne Audio ManualsMusical InstrumentsCamden EC2 - 2-CHANNEL MIC / LINE / INSTRUMENT PREAMPLIFIER AND HEADPHONE MIXER WITH HIGH-PASS FILTER



Power Safety

- The unit is supplied with an external power supply and suitable mains lead. Only use the

supplied external power supply, however if you decide to use a mains lead of your

choice, bear in mind the following:

- Refer to the rating label of the unit and always use a suitable mains cords.

- The unit should ALWAYS be earthed with the earth on the IEC socket.

- Please use compliant 60320 C13 TYPE SOCKET. When connecting to supply

outlets ensure that appropriate sized conductors and plugs are used to suit local

electrical requirements.

- Maximum cord length should be 4.5m (15’)

- The cord should bear the approval mark of the country it is to be used.

- Connect only to an AC power source that contains a protective earthing (PE) conductor.

- Only connect unit to single phase supplies with the neutral conductor at earth potential.



GB The apparatus shall be connected to mains socket outlets with a protective earthing

connection.

DEN Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til

stikproppens jord.

FIN Laite on lilettävä sojamaadoituskoskettimilla varustettuun pistorasiaan.

NOR Apparatet må tilkoples jordet stikkontakt.

SWE Apparaten skall anslutas till jordat uttag.



ATTENTION: Un-earthed metal parts may be present inside the enclosure. No

user serviceable parts inside - to be serviced only by qualified personnel.

When servicing, disconnect all power sources before removing any panels.



CE Certification



This unit is CE compliant. Note that any cables supplied with Cranborne Audio

equipment may be fitted with ferrite rings at each end. This is to comply with the

current regulations and these ferrites should not be removed.



FCC Certification

- Do not modify this unit! This product, when installed as indicated in the instructions

contained in the installation manual, meets FCC requirements.

- Important: this product satisfies FCC regulations when high quality shielded cables are

used to connect with other equipment. Failure to use high quality shielded cables or to

follow the installation instructions may cause magnetic interference appliances such as

radios televisions and will void your FCC authorisation to use this product in the USA.

- This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and if not installed and used in accordance with the instruction

manual may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at their own expense.