Installation Guide

Main Body Water Outlet Switch Control
1.Temperature Control
Increase Temperature: Turning the switch to the left (or sliding up according to device
instructions) can increase the water temperature. This operation increases the proportion
of hot water, thereby raising the output water temperature.
Decrease Temperature: Turning the switch to the right (or sliding down according to device
instructions) can decrease the water temperature. Doing so increases the proportion of cold
water, thereby lowering the output water temperature.
2. Function Switching
For devices with multiple water output modes (such as rain shower, handheld showerhead,
columnar flow, etc.), the direction of the function switch usually determines the selected
output mode:
3. Safety Lock: Temperature control devices are equipped with a safety lock feature. It is
necessary to unlock first (e.g., by pressing the center part of the switch) before adjusting
the temperature, to prevent accidental adjustments to excessively high or low
temperatures.
6
Cold water
Safety Lock
Hot water
Rainfall Water Output
Handheld
Water Output
Side Spray
Water Output