Datasheet

Technical
Datasheet
Article No. 151
Article Kabelglide
400ml
Storage / Shelf life
Shelf life is 2 years if stored correctly.
Package after emptying to be disposed via metal scrap.
Specific reistance at 25°C 1 x 10
15
[Ω cm]
Material compatibility very good
Heat conductions 0,16 [W/Km]
Dielectric strenght at 20°C 12 [kV/mm]
Dielectric constant at 25°C 2,8 (05 - 100 kHz)
Density at 25°C 0,97 [g/cm3]
Pour point -50°C
Tempreature Resistance -50 to +200°C
Appearance clear, colorless liquid
Viscosity at 25°C 1000 [mm²/s]
Pysical Properties
Available sizes
Product description / Please note
KABELGLIDE is a high grade lubricant, which enables easy pulling of cables and wires
through electric installation tubes. The attached extreme long and flexible extension tube can
easily be fitted to the spray head and guarantees spraying of the insides of installation tubes.
KABELGLIDE does not dry out, does not stick, is waterproof and is therefore also suitable as
a moisture buffer. KABELGLIDE is constant within a wide temperature scale from -50° C up
to +200° C. It does not attack the common used materials and is non-toxic.
Application
KABELGLIDE is a special lubricant for easy pulling of cables and wires through electric installation
tubes and hose. Due to its 70cm long application pipe is it very easy to applicate KABELGLIDE in
all kind of tubes. Thereby it is easier to aspirate cables. Insert extension tube to spray head and
spray while exerting. If necessary spray wires as well. Further information concerning
KABELGLIDE to be found in recent MSDS.
ITW LLC Co. KG
Mühlacker Strasse 149, D-75417 Mühlacker
Telefon [phone], Telefax [phone]
E-Mail [e-mail], website www.itwcp.de