Datasheet

Technical
Datasheet
Article No.
120
Article
Plastik
400ml
Storage / Shelf life
Shelf life is 2 years if stored correctly.
Package after emptying to be disposed via metal scrap.
Surface resistance 5 x 10
14
[Ω]
Insulation resistance 10
14
[Ω]
Dielectric strenght 21 [kV mm] up to 790kg (Falex)
Viscosity 12s [DIN 53211]
Resistance to acids, salt, corrosive vapors
thermal stress, alkalins, moisture
Necessary coar thickness 20 - 50 [µm]
Coverage 5 - 8 [m²/400ml can]
Temperature resistance -70 up to -120 [°C]
Specific gravity at 20°C 0,88 [g/cm³]
Drying condition at room temperature 25min dry to touch
48h totally cured
Color colorless
Odor solvent
Pysical Properties
Available sizes
Product description / Please note
PLASTIK is a laquer based on acrylic resins which is particularly suitable for electronics. It forms
a shiny, flexible and protective film that is resistant to acids, salt, fungus, corrosive vapors,
thermal stress, mechanical abuse, alkalis, alcohol, moisture, and tough environmental conditions.
It s effective within a wide range of temperature from -70° C to +120°C.
PLASTIK does not drip and permits soldering through its own layer.
Application
Protection of printed circuit boards, components, wires, cables etc. Elimination or prevention of
creepage, corona effects, short circuits and discharges. Corrosion protection of parts under bad
atmospheric conditions. Waterproofing of various materials such as cardboards, wood or leather.
The surface has to be free of greases, oil and wax. Spray on the whole part froma distance of
approximately 30cm as otherwise the applied layer might dissolve.
ITW LLC Co. KG
Mühlacker Strasse 149, D-75417 Mühlacker
Telefon [phone], Telefax [phone]
E-Mail [e-mail], website www.itwcp.de