Certifications 2

according to Regulation (EC) No 1907/2006
Safety Data Sheet
ITW LLC & Co. KG
Protection
Revision date: 09.12.2019 Product code: 115 Page 4 of 8
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Exposure limits (EH40)
Categoryfibres/mlmg/m³ppmSubstanceCAS No Origin
TWA (8 h)5000Carbon dioxide124-38-9 9150 WEL
STEL (15 min)15000 27400 WEL
TWA (8 h)400Propan-2-ol67-63-0 999 WEL
STEL (15 min)500 1250 WEL
8.2. Exposure controls
If handled uncovered, arrangements with local exhaust ventilation have to be used. Do not breathe
gas/fumes/vapour/spray.
Appropriate engineering controls
Remove contaminated, saturated clothing immediately. Protect skin by using skin protective cream. After work,
wash hands and face. When using do not eat or drink.
Protective and hygiene measures
Tightly sealed safety glasses.
Eye/face protection
DIN EN 374 Tested protective gloves are to be worn: NBR (Nitrile rubber) For special purposes, it is
recommended to check the resistance to chemicals of the protective gloves mentioned above together with the
supplier of these gloves. NBR (Nitrile rubber)
Hand protection
Protective clothing:
Skin protection
In case of inadequate ventilation wear respiratory protection.
Respiratory protection
light yellow
Aerosol
Physical state:
Colour:
9.1. Information on basic physical and chemical properties
SECTION 9: Physical and chemical properties
characteristic
Odour:
Test method
Changes in the physical state
60 °CInitial boiling point and boiling range:
Pour point:
ISO 3016
< -20 °C
ASTM D 3828
Flash point:
1,2 vol. %Lower explosion limits:
7 vol. %Upper explosion limits:
300 °CIgnition temperature:
Print date: 09.12.2019GB - ENRevision No: 1,17