Datasheet

Technical
Datasheet
Article No.
105
Article
Spraywash
400ml
Pysical Properties
Available sizes
Product description / Please note
SPRAYWASH contains a powerful mixture of solvents that ensure gentle but effective removing of
dirt and grease. The product`s good penetration and flowing properties enable SPRAYWASH to
clean any kinds of soiling without difficulty. It does not attack any material in common use and
evaporates completely after a short time without leaving any residue. SPRAYWASH has been
developed especially for the cleaning of dissolved oxide layers after having used CONTACLEAN.
Application
Intensive cleaning of contacts, components and appliances in electrical engineering, especially on
switches, electric motors, relays, contactors, cabinets, etc. Also to be used to wash out oxide and
sulphide layers on contact surfaces previously dissolved by CONTACLEAN. Spray SPRAYWASH
thoroughly on surfaces to be cleaned. Ensure uniform wetting of these surfaces. Adjust quantity of
SPRAYWASH to degree of dirtiness. For spots of difficult access, use the attached extension
tube. Spray at intervals, avoid continuous spraying.
Electronical devices to be switched-off during cleaning and plug to be taken out. Cleaning
instructions should to be taken into account.
Further information concerning SPRAYWASH is available in the MSDS.
Appearance clear, colorless liquid
Odor characteristic
Density at 20°C 0,75 [g/cm³]
Material compatibility good
Evaporation average
Surface tension 23 [mN/m]
Storage / Shelf life
Shelf life is 2 years if stored correctly.
Package after emptying to be disposed via metal scrap.
ITW LLC Co. KG
Mühlacker Strasse 149, D-75417 Mühlacker
Telefon [phone], Telefax [phone]
E-Mail [e-mail], website www.itwcp.de