SDS
Repair Kit - Filler 30 g
Safety Data Sheet
according to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012.
03/09/2017
EN (English US)
3/8
6.2. Environmental precautions
No additional information available
6.3. Methods and material for containment and cleaning up
For containment
:
Contain and/or absorb spill with inert material (e.g. sand, vermiculite), then place in a suitable
container. Do not flush to sewer or allow to enter waterways. Use appropriate Personal
Protective Equipment (PPE).
Methods for cleaning up
:
Scoop up material and place in a disposal container. Provide ventilation.
6.4. Reference to other sections
For further information refer to section 8: "Exposure controls/personal protection"
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
:
Keep away from sources of ignition - No smoking. Avoid contact with skin and eyes. Avoid
breathing dust/fume/gas/mist/vapours/spray. Do not swallow. Handle and open container with
care. When using do not eat, drink or smoke. Take precautionary measures against static
discharge. Use only non-sparking tools. Use only outdoors or in a well-ventilated area.
Hygiene measures
:
Launder contaminated clothing before reuse. Wash hands before eating, drinking, or smoking.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures
:
Proper grounding procedures to avoid static electricity should be followed.
Storage conditions
:
Keep out of the reach of children. Keep container tightly closed and in a well-ventilated place.
Keep cool. Keep away from sources of ignition.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Talc (14807-96-6)
ACGIH
ACGIH TWA (mg/m³)
2 mg/m³ (particulate matter containing no asbestos and
<1% crystalline silica, respirable particulate matter)
IDLH
US IDLH (mg/m³)
1000 mg/m³ (containing no asbestos and <1% quartz)
NIOSH
NIOSH REL (TWA) (mg/m³)
2 mg/m³ (containing no Asbestos and <1% Quartz-
respirable dust)
Limestone (1317-65-3)
OSHA
OSHA PEL (TWA) (mg/m³)
15 mg/m³ (total dust)
5 mg/m³ (respirable fraction)
NIOSH
NIOSH REL (TWA) (mg/m³)
10 mg/m³ (total dust)
5 mg/m³ (respirable dust)
Styrene (100-42-5)
ACGIH
ACGIH TWA (ppm)
20 ppm
ACGIH
ACGIH STEL (ppm)
40 ppm
OSHA
OSHA PEL (TWA) (ppm)
100 ppm
OSHA
OSHA PEL (Ceiling) (ppm)
200 ppm
OSHA
Acceptable maximum peak above the acceptable
ceiling concentration for an 8-hr shift
600 ppm Peak (5 minutes in any 3 hours)
IDLH
US IDLH (ppm)
700 ppm
NIOSH
NIOSH REL (TWA) (mg/m³)
215 mg/m³
NIOSH
NIOSH REL (TWA) (ppm)
50 ppm
NIOSH
NIOSH REL (STEL) (mg/m³)
425 mg/m³
NIOSH
NIOSH REL (STEL) (ppm)
100 ppm
Titanium dioxide (13463-67-7)
ACGIH
ACGIH TWA (mg/m³)
10 mg/m³
OSHA
OSHA PEL (TWA) (mg/m³)
15 mg/m³ (total dust)
IDLH
US IDLH (mg/m³)
5000 mg/m³