Datasheet

Electronic Components
Crameda Intersys AG Tel. [phone] MS-U-E-060915.doc
Kirchstrasse 22 Fax [phone] Page : 7
CH-9113 Degersheim · Schweiz http://www.crameda.com
Division module
A switch assembly may contain several switch groups
separated by ribbed division modules. The dimensions of a
division module correspond to those of a switch module.
Division modules are available in series A, L, M, Q, U, V and
W.
Pair of division plates
For assembling Codicounts (7-Segment LED displays) and
Multiswitches, division plates can be used to stack displays
and switches together.
End brackets and block assembly
The individual switch module can be arranged into block
assemblies. These are complemented by two end brackets
and held together with threaded rods.
The assembly is inserted into the rectangular cut-out of the
front panel.
Switch series for front mounting are secured by retaining
springs.
Switch types for rear mounting are inserted into the front panel
cut-out from behind and secured by four screws.
Based on customer specification, Crameda Intersys provides
block assembly of switches as a "ready to install" service.
In series D, U, V and Z, mounting brackets are added left and
right, pressed together lightly, yielding a ready to install block.
For more detailed information please refer to End brackets,
mounting accessories and block assembly.